ZyXEL Communications NAS Series - Configuring the P2 P Download Settings

Chapter 17 Applications
Cloud Storage User’s Guide
225
17.7.3 Configuring the P2P Download Settings
Click Applications > Download Service > Preferences > P2P download to open the following
screen. Use this screen to configure P2P download settings.
• Current Location - This is the location of the selected folder.
• Folder Name - Enter a new folder name and click to create it.
• Type - This identifies the item as a file or folder.
• Name - This is the name of the folder/file.
Select a folder. If you don’t select a folder, a forward slash (/) displays in the Path field.
All contents within the specified share are automatically selected.
Click Apply to save your settings and Cancel to close the screen.
Download Period
Control
This feature sets the NAS to download files only within a specified time period.
Enable Download
Period Control
Use the check box to turn the download period control on or off.
Download Service
is active in the
time period
(hh:mm -
hh:mm)
Specify the time period for the NAS to download files.
Note: If you also configured the Power On/Off Schedule feature in the Power
Management screen, make sure your active download period does not conflict with
the power-off period.
Apply Click this to save your changes.
Reset Click this to restore your previously saved settings.
Cancel Click this to return to the previous screen without saving.
Table 74 Applications > Download Service > Preferences > General Settings (continued)
LABEL DESCRIPTION