ZyXEL Communications NAS Series - 16.6 Date;Time Screen

Chapter 16 System Setting
Cloud Storage User’s Guide
210
The following table describes the labels in these screens.
16.6 Date/Time Screen
Use this screen to select a time zone and a time server from which your NAS can get the time and
date. This time is then used in NAS logs and alerts.
Click the System Setting link in the navigation panel and then click the Date/Time link to access
the Date/Time screen.
Figure 116 System Setting > Date/Time
Table 65 System Setting > Server Name
LABEL DESCRIPTION
Server Name Enter a name to identify your NAS on the network in this field.
You can enter up to 15 alphanumeric characters with minus signs allowed but not as the
last character. The name must begin with an alphabet (a-z) and is NOT case sensitive.
Description Add text here to describe the NAS if the Server Name field is not enough. Use up to 61
characters. You can use all characters except the following: /\:|[]<>+;,?=*"~.
Workgroup Name Type your workgroup name in this field. A workgroup is a group of computers on a
network that can share files. These user accounts are maintained on the NAS.
You can enter up to 15 alphanumeric characters with minus signs allowed but not as the
last character. The name must begin with an alphabet (a-z) and is NOT case sensitive.
Prevent NAS From
Being Master
Browser
Select this option if computers in your workgroup are named with non-English characters
(such as Chinese and Russian). When you perform a search in the workgroup, this option
allows you to locate computers named with non-English characters.
Apply Click this to save your changes.
Reset Click this to restore previously saved settings.