ZyXEL Communications NAS Series - Creating a Volume on Disk Group

Chapter 8 Storage Manager
Cloud Storage User’s Guide
64
8.3.3 Creating a Volume on Disk Group
Use the Create Volume on Disk Group screen to configure a volume on an existing or new disk
group. Click Create in the Volume on Disk Group section of the Internal Storage > Volume
screen to open the screen as shown.
Note: It is suggested to create a volume directly on a disk instead of on a disk group if
high performance is important to you. See Section 8.3.1 on page 55 for more
information.
Volume
Capacity
This field displays the total size of the volume.
Back Click Back to go to the previous step.
Apply Click Apply to save the settings.
Cancel Click Cancel to close the screen without saving any settings.
Table 13 Manage Volume (continued)
LABEL DESCRIPTION