Chapter 10 Control Panel
Cloud Storage User’s Guide
122
10.8 FW Upgrade Screen
Use this screen to upgrade the NAS firmware. You should first have downloaded the latest firmware
files from the ZyXEL website.
Do not turn off the NAS while it is upgrading the firmware or you may
render it unusable.
Click Control Panel > System > FW Upgrade to open the following screen. Latest Firmware
Check allows you to check the latest firmware version and perform the upgrade.
Figure 74 Control Panel > System > FW Upgrade > Latest Firmware Check
The following table describes the labels in this screen.
Table 49 Control Panel > System > FW Upgrade > Latest Firmware Check
LABEL DESCRIPTION
Model Name Displays the model name of you NAS
Current Firmware
Version
Displays the current firmware version of your NAS
Last Check Displays the last checking time. If no, it is blank.
Check Now Click this to check ZyXEL’s server for updated firmware.
Periodically Check for
Latest Firmware
Automatically
Select this to have the NAS regularly check ZyXEL’s server for updated firmware. The
NAS notifies you at login if a new firmware is available.
Click Apply to save this field’s setting.
Status Displays the firmware checking status or error messages. If there is no previous
checking information, it displays --.
To Next Page
Loading...
