ZyXEL Communications NAS Series - Editing a Volume on Disk Group; Disk Group

Chapter 8 Storage Manager
Cloud Storage User’s Guide
69
8.3.4 Editing a Volume on Disk Group
Use the Edit Volume on Disk Group screen to expand a volume’s capacity. In the Internal
Storage > Volume screen, select a volume and then click Edit in the Volume on Disk Group
section to open the screen as shown.
Figure 42 Edit Volume on Disk Group
The following table describes the labels in this screen.
8.3.5 Disk Group
Use the Disk Group screen to configure and manage disk groups. From the Internal Storage
screen, click Disk Group to open the screen as shown.
Table 15 Edit Volume on Disk Group
LABEL DESCRIPTION
Unallocated
capacity on Disk
Group X
This field displays the percentage of the disk group size unallocated to other volumes, the
size in use, and total size of the disk group.
Current volume
size
This field displays the total size of the volume, excluding the file system size.
New volume
size
This field displays the smallest size to which you can expand the volume (this includes the
volume’s current available size, file system size, and a minimum additional capacity for
expansion). You can enter a bigger number or click MAX to allocate all the rest of the space
in the disk group to the volume.
Apply Click Apply to save the settings.
Cancel Click Cancel to close the screen without saving any settings.