Chapter 27 Protect
Cloud Storage User’s Guide
330
27.3.8 Restore Archive Screen
Use this screen to restore previous backups made with the NAS.
27.3.9 Restore Archive: Step 1
Click Protect > Backup screen (Section 27.3 on page 321). You can restore a previous backup job
by selecting a backup job from the list and clicking Restore Archive.
Figure 207 Protect > Backup > Restore Archive: Step 1
The following table describes the labels in this screen.
Every how many
weeks?
This is only available if you selected Weekly as your backup frequency.
Enter the interval between weeks when NAS performs the backup job.
Step 1: Please
select the month(s)
of a year
This is only available if you selected Monthly as your backup frequency.
Select the month(s) when you want the NAS to perform the backup job.
Step 2: Please
select the day of the
month
This is only available if you selected Monthly as your backup frequency.
Select the day in a month when you want the NAS to perform the backup job.
Previous Click this to go back to the previous screen.
Done Click this to close the screen.
Table 134 Protect > Backup > Edit: Step 2 (continued)
LABEL DESCRIPTION
Table 135 Protect > Backup > Restore Archive: Step 1
LABEL DESCRIPTION
Step 1. Select
Restore Source
Select a previous archive backup that you want to restore to the NAS.
Job Information
Job Name This is the name to identify the backup job.
Job Description This is a short description (up to 100 keyboard characters) for the backup job.
Backup Type This is the type of backup implemented for the backup job.
Scheduler
Information
This field displays the backup’s frequency.
Restored Time Select a previous backup in the list that you want to restore to your NAS.
Next Click this to go to the next screen.
To Next Page
Loading...
