Chapter 26 Maintenance Screens
Cloud Storage User’s Guide
311
The following table describes the labels in this screen.
26.6 SSL Certification
Click Maintenance > SSL to open this screen, where you can turn on HTTPS, create a public key
certificate, or upload a public key certificate that was issued by a known certificate authority.
Figure 194 Maintenance > SSL
Table 120 Maintenance > Configuration
LABEL DESCRIPTION
Backup Current Configuration Settings
Backup Click this to save the current configuration of the NAS to your computer. A pop-up
screen appears asking you to confirm. Click OK to continue or Cancel to quit.
Restore Configuration When you restore a file configuration, the NAS checks the volumes/share paths on
the NAS and the configuration file.
If the volume exists but the share path is missing in the NAS, the NAS automatically
creates this share path.
If the volume does not exist on the NAS, the Status of the share will show “missing
share icon” in Shares screen (see Table 107 on page 292).
Browse Click this to locate a previously-saved configuration file.
Restore Click this to load the previously-saved configuration file to the NAS. This replaces
your current NAS configuration settings with the settings in the previously-saved
configuration file.
A pop-up screen appears asking you to confirm. Click OK to continue or Cancel to
quit.
To Next Page
Loading...
