Chapter 2 Getting Started
Cloud Storage User’s Guide
21
2.3.2 Main NAS Starter Utility Screen
The main NAS Starter Utility screen displays after you select an NAS in the NAS Seeker screen.
Figure 8 NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Status This shows whether the NAS is Online, Unreachable, Configuring, or Config Failed.
Server Name This is the server name you configured for the NAS. If you have more than one NAS in
your network, it is recommended that you give each one a unique name for identification
purposes.
IP Address This is the current IP address of the NAS.
Table 2 NAS Seeker (continued)
LABEL DESCRIPTION
Table 3 NAS Starter Utility Main Screen
LABEL DESCRIPTION
? Click this to display the utility help.
Configuration Click this to configure system settings (see Section 2.3.5 on page 23).
NAS Seeker Click this to use the NAS Seeker screen (Section 2.3.1 on page 20) to find and connect to
a different NAS on your network.
Server Name This is the server name you configured for the NAS. If you have more than one NAS in
your network, it is recommended that you give each one a unique name for identification
purposes.
IP Address This is the current IP address of the NAS.
To Next Page
Loading...
