ZyXEL Communications NAS Series - Directory of the NAS

Chapter 2 Getting Started
Cloud Storage User’s Guide
22
2.3.3 Directory of the NAS
In the main NAS Starter Utility screen click Shared Folder to log into the NAS’s file directory in
Windows Explorer. Enter the administrator user name and password and click Login.
Figure 9 Login
The utility opens the NAS’s directory in Windows Explorer.
Figure 10 Directory
MAC Address This is the NAS’s unique physical hardware address (MAC).
Firmware Version This shows the version of firmware the NAS is currently using.
Status This shows whether the NAS is Online, Uninitialized, Unreachable, Configuring, or
Config Failed.
Run Initialization
Wizard
This button displays if the NAS detects that the NAS has not yet configured any of the
installed hard disks. Click this button to go to the Web Configurator login screen (see
Section 7.2 on page 38).
Capacity This shows the NAS’s total, in-use, and remaining storage capacity.
DeskTop Click this button to go to the Web Configurator login screen (see Section 7.2 on page 38).
Network Drive Click this to add the NAS as a network drive in your computer’s Windows Explorer.
Shared Folder Click this to log into the NAS’s file directory in Windows Explorer.
myZyXELcloud Click this to go to mycloud.zyxel.com to set up a free DDNS hostname for the NAS so you
can connect to it easily from the Internet.
Table 3 NAS Starter Utility Main Screen (continued)
LABEL DESCRIPTION