Chapter 10 Control Panel
Cloud Storage User’s Guide
120
The following table describes the labels in this screen.
10.7 DyDNS Screen
Use this to enable and configure Dynamic DNS.
Dynamic DNS (DyDNS) allows you to update your current dynamic IP address with a dynamic DNS
service so that anyone can contact you (such as through NetMeeting or CUSeeMe). You can also
access your FTP server or Web site on your own computer using a domain name (for instance
myhost.dhs.org, where myhost is a name of your choice) that will never change instead of using an
IP address that changes each time you reconnect. Your friends or relatives will always be able to
call you even if they don't know your IP address.
Click Control Panel > Network > DyDNS to open the following screen.
Table 47 Control Panel > Network > Terminal
LABEL DESCRIPTION
Enable Telnet
Service
Select this to enable Telnet access to the NAS. Clear it to not allow Telnet access to the
NAS.
To use Telnet, log in as “admin” or “root” and use the admin password.
Enable SSH
Service
Select this to enable SSH access to the NAS. Clear it to not allow SSH access to the NAS.
To use SSH, log in as “admin” or “root” and use the admin password.
Apply Click this to save your changes.
Reset Click this to restore previously saved settings.
To Next Page
Loading...
