Chapter 10 Control Panel
Cloud Storage User’s Guide
121
Figure 73 Control Panel > Network > DyDNS
The following table describes the labels in this screen.
Table 48 Control Panel > Network > DyDNS
LABEL DESCRIPTION
Enable DyDNS Select this to use dynamic DNS.
You need to have registered a dynamic DNS account with a service provider such as
www.dyndns.org. The Dynamic DNS service provider will give you a password or key.
Service Provider Select your Dynamic DNS service provider.
Hostname Enter your host name provided by the Dynamic DNS service.
Username Enter your user name for your DNS account.
Password Enter the password assigned to your DNS account.
Status This shows the DyDNS update result:
Disabled – You have manually disabled the DyDNS feature.
Error – An unrecoverable error (such as authentication error) occurred caused the NAS
to disable the DyDNS feature automatically.
Fail to update – A recoverable error (such as a temporary Internet disconnect)
occurred. The NAS will retry later.
Updated - The NAS updated the DyDNS server with the NAS’s public IP address.
Default Gateway This shows with which public IP of interface the NAS updated the DyDNS server.
External Address This shows the IP address of the NAS that can be accessed in the Wide Area Network
(WAN). Note that this is not assigned by the DyDNS server.
Apply Click this to save your changes.
Reset Click this to clear the fields.
To Next Page
Loading...
