Chapter 19 Auto Upload
Cloud Storage User’s Guide
273
Add Click this to open the following screen where you can set a folder that contains files you
want the NAS to automatically upload.
• Share - Select the share from the list.
• Path - Type the folder location in the share directly or click Browse to open the
following screen and navigate to the folder’s location.
• Current Location - This is the location of the selected folder.
• Folder Name - Enter a new folder name and click to create it.
• Type - This is the type of the folder/file.
• Name - This is the name of the folder/file.
Select a folder. If you don’t select a folder, a forward slash (/) displays in the Path field.
All contents within the specified share are automatically selected.
Click Apply to save your settings and Cancel to close the screen.
Settings
Grace Period Specify how long the NAS should wait when you add a new file for auto upload. For
example, if you set the grace period to 5 minutes, the NAS uploads a new file after it
has been in a watched folder for 5 minutes. You can choose from a range of 1 to 10080
minutes (up to one week).
Bandwidth Limit Enter the maximum upload rate for auto upload. You can choose from a range of 0 to
100,000 KB/s. Enter 0 if you do not want to set any limit.
Use this to leave bandwidth on your network connection for other traffic, especially if
your Internet connection has restricted upload speed.
Apply Click this to save your changes in this section.
Reset Click this to restore previously saved settings.
Close Click this to return to the previous screen without saving.
Table 98 Applications > Auto Upload > FTP Uploadr > Preferences (continued)
LABEL DESCRIPTION
To Next Page
Loading...
