Chapter 14 Tutorials
Cloud Storage User’s Guide
193
3 Select the volume1 check box to select all the folders and files.
Select Remote and enter the other NAS’s address, username, password, and share name.
If you want to make sure the remote NAS is reachable, click Test Connection.
Figure 95 Protect > Backup > Add Job: Step 2
4 In this example, the target NAS is on the LAN so leave the compression off.
Security is already configured on the target NAS so you can leave the encryption off, too.
Have the NAS keep 3 backups.
Figure 96 Protect > Backup > Add Job: Step 3
5 Set the frequency to Weekly. Schedule the backup for 5:00 every Saturday morning.
Protect > Backup > Add Job: Step 4
To Next Page
Loading...
