Chapter 16 System Setting
Cloud Storage User’s Guide
212
End Date Configure the day and time when Daylight Saving Time ends if you selected Enable
Daylight Saving. The o'clock field uses the 24 hour format. Here are a couple of
examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each
time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So
in the United States you would select November, First, Sunday, at 2:00.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment
(1 A.M. GMT or UTC). So in the European Union you would select October, Last,
Sunday. The time you specify depends on your time zone. In Germany for instance, you
would type 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Offset Specify by how many hours to change the time for Daylight Saving Time.
Apply Click this to save your changes. If you configured a new time and date, Time Zone and
Daylight Saving at the same time, all of the settings take affect.
Cancel Click this to restore your previously saved settings.
Table 66 System Setting > Date/Time (continued)
LABEL DESCRIPTION
To Next Page
Loading...
