Chapter 8 Storage Manager
Cloud Storage User’s Guide
54
Usage This field shows the percentage of the volume being used, the percentage that is
available, and the total disk size.
Hot Spare This field shows the name of the standby disk if there is any for a RAID 1 or RAID 5
volume. Otherwise, it shows not supported.
Volume on Disk Group
Use this section to configure and manage volumes built on disk groups.
Create Click this to format internal hard disks and create a new volume on a disk group. All data
on the disks will be lost.
Note: This button is unavailable when a volume or disk group is being created, deleted or
changing the RAID type.
Edit Select a volume and click Edit to expand the volume’s capacity.
Delete Select a volume and click Delete to remove it.
Note: If you delete a volume, all data in the volume disks is erased.
Note: Deleting a volume on a disk group here does not delete the corresponding disk
group. To delete a disk group, click Internal Storage > Disk Group.
Disk Group X This field shows the name of the disk group, the percentage of the disk group size that is
available, the disk group size being used, and the total disk group size.
Status This field shows whether the volume is normal, degraded, crashed, Creating, Deleting,
Expanding, Repairing or Changing the RAID type.
Normal: A green circle represents a healthy volume.
Degraded: An orange circle represents a degraded RAID 1 volume.
Crashed: A red circle represents a down volume.
The following status also displays the percentage of an action has been completed.
Creating: The NAS’s percentage progress in creating the volume.
Deleting: The NAS’s percentage progress in deleting the volume.
Expanding: The NAS’s percentage progress in expanding the volume. For a RAID 1
volume, this also displays the percentage of resynchronizing the NAS has finished and
the evaluated remaining time.
Repairing: The NAS’s percentage progress in repairing the volume. For a RAID 1
volume, this also displays the percentage of resynchronizing the NAS has finished and
the evaluated remaining time.
Changing: The NAS’s percentage progress in changing the volume’s RAID type. For a
RAID 1 volume, this also displays the percentage of resynchronizing the NAS has
finished and the evaluated remaining time.
Volume Name This field shows the name of the volume. Click the column’s heading cell to display an
arrow. Use the arrow to sort the table entries in ascending or descending order.
File System This field shows what file system the volume uses. At the time of writing, your NAS uses
the EXT4 file system for internal volumes.
Usage This field shows the percentage of the volume being used, the percentage that is
available, and the total disk group size.
Table 11 Internal Storage > Volume (continued)
LABEL DESCRIPTION
To Next Page
Loading...
