Chapter 8 Storage Manager
Cloud Storage User’s Guide
75
Figure 45 Hard Disk
The following table describes the labels in this screen.
8.3.6.1 S.M.A.R.T
Use the S.M.A.R.T screens to view hard disk health indicators. Self Monitoring, Analysis, and
Reporting Technology (S.M.A.R.T) detects and reports the reliability of hard disks using standard
indicators (called “attributes”), to help you anticipate possible disk failures.
Note: The available S.M.A.R.T information varies from one hard disk vendor to another.
From the Internal Storage > Hard Disk screen, select a disk and click S.M.A.R.T to open the
screen as shown.
Table 18 Hard Disk
LABEL DESCRIPTION
Status This field shows the status of an installed hard disk.
Normal: A green circle displays. This represents the volume is functioning normally.
Crashed: A red circle displays. This represents the volume is down.
Disk Name This field shows the name of the hard disk.
Used by This field shows the name of a volume or disk group built on the hard disk if any. This field
also displays the RAID type the volume or disk group is using.
Size This field shows the total size of the hard disk.
Model Name This field shows the model of the hard disk.
Temperature This field shows the temperature of the hard disk in degrees celsius (
o
C) and fahrenheit (
o
F).
To Next Page
Loading...
