ZyXEL Communications NAS Series - Page 90

Chapter 8 Storage Manager
Cloud Storage User’s Guide
90
The following table describes the labels in these screens.
Table 25 Create a New Target
LABEL DESCRIPTION
Step 1. Set Up Target Properties
Name Enter the name of your iSCSI target.
Note: Valid characters for the name are 0-9, a-z, and A-Z, and the maximum length is 30
characters. The “-” symbol is allowed as well, but cannot be the first character.
IQN The iSCSI Qualified Name (IQN) of the target is automatically generated after you enter
the target name.
Allowed initiator
(IQN)
The allowed initiator name is in the iSCSI Qualified Name (IQN) format.
To check the initiator name, open the iSCSI Initiator program on your computer. Select
the Configuration tab and you can see the initiator name as shown in the following
screen.
Note: If you use your computer as the iSCSI initiator, download and install the iSCSI
Initiator first. For example, use Microsoft iSCSI Software Initiator with a Microsoft
OS or globalSAN iSCSI Initiator with MAC OS.