Chapter 22 Sys OP Mode
NBG4604 User’s Guide
198
The following table describes the labels in the General screen.
Table 73 Maintenance > Sys OP Mode > General
Note: If you select the incorrect System Operation Mode you cannot connect to the
Internet.
LABEL DESCRIPTION
System Operation Mode
Router Select Router if your device routes traffic between a local network and
another network such as the Internet. This mode offers services such as a
firewall or content filter.
Access Point Select Access Point if your device bridges traffic between clients on the
same network.
Apply Click Apply to save your settings.
Reset Click Reset to return your settings to the default (Router)
To Next Page
Loading...
