Chapter 8 Other Wireless Configuration
ZyXEL NWA-3100 User’s Guide
110
Figure 64 MAC Address Filter
The following table describes the labels in this screen.
" To activate MAC filtering on a profile, select Enable from the Enable MAC
Filtering drop-down list box in the WIRELESS > SSID > Edit screen and click
Apply.
Table 32 MAC Address Filter
LABEL DESCRIPTION
Filter Action Define the filter action for the list of MAC addresses in the MAC address filter
table.
Select Deny Association to block access to the router. MAC addresses not
listed will be allowed to access the router.
Select Allow Association to permit access to the router. MAC addresses not
listed will be denied access to the router.
MAC Address Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the wireless
station to be allowed or denied access to the ZyXEL Device.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
