ZyXEL Communications NWA-3100 - Figure 200 WPA Configuration File Example

Appendix H Text File Based Auto Configuration
ZyXEL NWA-3100 User’s Guide
280
Figure 200 WPA Configuration File Example
wlan Command Configuration File Example
This example configuration file uses the wlan command to configure the AP to use the
security and SSID profiles from the
wcfg command configuration file examples and general
wireless settings. You could actually combine all of this chapter’s example configuration files
into a single configuration file. Remember that the commands are applied in order. So for
example, you would place the commands that create security and SSID profiles before the
commands that tell the AP to use those profiles.
!#ZYXEL PROWLAN
!#VERSION 14
wcfg security 4 name Test-wpa
wcfg security 4 mode wpa
wcfg security 4 reauthtime 1800
wcfg security 4 idletime 3600
wcfg security 4 groupkeytime 1800
wcfg security save
wcfg radius 4 name radius-rd1
wcfg radius 4 primary 172.0.20.38 1812 20 enable
wcfg radius 4 backup 172.0.20.39 1812 20 enable
wcfg radius save
wcfg ssid 4 name ssid-wpa
wcfg ssid 4 security Test-wpa
wcfg ssid 4 qos 4
wcfg ssid 4 l2isolation disable
wcfg ssid 4 macfilter disable
wcfg ssid save