Chapter 5 Wireless Configuration
ZyXEL NWA-3100 User’s Guide
74
5.5 Wireless Screen Overview
The following is a list of the screens you can configure on the ZyXEL Device.
1 Configure the ZyXEL Device to operate in AP, AP+Bridge, Bridge/Repeater or
MBSSID mode in the Wireless screen. You can also select an SSID Profile in the
Wireless screen.
2 Use the SSID screens to view and edit SSID profiles.
3 Use the Security screen to configure wireless profiles.
4 Use the RADIUS screen to configure RADIUS authentication and accounting settings.
5 Use the Layer-2 Isolation screen to prevent wireless clients associated with your
ZyXEL Device from communicating with other wireless clients, APs, computers or
routers in a network.
6 Use the MAC Filter screen to allow or restrict access to your wireless network based on
a client’s MAC address.
5.6 Configuring Wireless Settings
Click WIRELESS > Wireless. The screen varies depending upon the operating mode you
select.
5.6.1 Access Point Mode
Select Access Point as the Operating Mode to display the screen as shown next.
Listening All BPDUs are received and processed.
Learning All BPDUs are received and processed. Information frames are submitted to the
learning process but not forwarded.
Forwarding All BPDUs are received and processed. All information frames are received and
forwarded.
Table 15 STP Port States
PORT STATES DESCRIPTIONS
To Next Page
Loading...
