Chapter 7 MBSSID and SSID
ZyXEL NWA-3100 User’s Guide
102
• Also, use the VLAN screen to set up wireless VLANs based on SSID.
Configure the fields in the above screens to use the settings in an SSID profile.
Select an SSID profile in the WIRELESS > SSID screen and click Edit to display the
following screen.
Figure 58 Configuring SSID
The following table describes the labels in this screen.
Table 30 Configuring SSID
LABEL DESCRIPTION
Name Enter a name identifying this profile.
SSID When a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Hide Name (SSID) Select Disable if you want the ZyXEL Device to broadcast this SSID (a
wireless client scanning for an AP will find this SSID). Alternatively, select
Enable to have the ZyXEL Device hide this SSID (a wireless client scanning
for an AP will not find this SSID).
Security Select a security profile to use with this SSID profile. See Section 6.9 on page
86 for more information.
RADIUS Select a RADIUS profile from the drop-down list box, if you have a RADIUS
server configured. If you do not need to use RADIUS authentication, ignore
this field. See Section 6.11 on page 95 for more information.
To Next Page
Loading...
