ZyXEL Communications NWA-3100 - Backup Via Console Port; Figure 146 System Maintenance: Backup Configuration; Figure 147 System Maintenance: Starting Xmodem Download Screen; Figure 148 Backup Configuration Example

Chapter 22 Firmware and Configuration File Maintenance
ZyXEL NWA-3100 User’s Guide
209
22.2.5 Backup Via Console Port
Back up configuration via console port by following the HyperTerminal procedure shown
next. Procedures using other serial communications programs should be similar.
1 Display menu 24.5 and enter “y” at the following screen.
Figure 146 System Maintenance: Backup Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 147 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in
the following screen.
Figure 148 Backup Configuration Example
4 After a successful backup you will see the following screen. Press any key to return to
the SMT menu.
Figure 149 Successful Backup Confirmation Screen
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...
** Backup Configuration completed. OK.
### Hit any key to continue.###
Type a location
for storing the
configuration file
or click Browse
to look for one.
Choose the
Xmodem protocol.
Then click Receive.