ZyXEL NWA-3100 User’s Guide
229
APPENDIX A
Product Specifications
The following tables summarize the ZyXEL Device’s hardware and firmware features.
Table 82 Hardware Specifications
Power Specification 12 V DC, 1 A
Reset button Returns all settings to their factory defaults.
Ethernet Port • Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-
duplex mode.
• Auto-crossover: Use either crossover or straight-through Ethernet
cables.
Power over Ethernet
(PoE)
IEEE 802.3af compliant.
Operation Temperature 0 ~ 50 º C
Storage Temperature -30 ~ 60 º C
Operation Humidity 10 ~ 90 % (non-condensing)
Storage Humidity 5 ~ 95 % (non-condensing)
Dimensions (W x D x H) 153 mm x 92 mm x 42 mm
Distance between the
centers of wall-mounting
holes on the device’s
back.
60 mm
Screw size for wall-
mounting
6mm ~ 8mm (0.24" ~ 0.31") head width.
Table 83 Firmware Specifications
FEATURE DESCRIPTION
Wireless LAN Standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g
Wireless security WEP, WPA(2), WPA(2)-PSK, 802.1x
Layer 2 isolation Prevents wireless clients associated with your ZyXEL Device from
communicating with other wireless clients, APs, computers or routers in
a network.
Multiple BSSID (MBSSID) MBSSID mode allows the ZyXEL Device to operate up to 8 different
wireless networks (BSSs) simultaneously, each with independently-
configurable wireless and security settings.
Rogue AP detection Rogue AP detection detects and logs unknown access points (APs)
operating in the area.
VLAN 802.1Q VLAN tagging.
To Next Page
Loading...
