ZyXEL Communications NWA-3100 - Figure 108 802 Attribute Setting for Tunnel-Medium-Type; Figure 109 VLAN ID Attribute Setting for Tunnel-Pvt-Group-ID

Chapter 14 VLAN
ZyXEL NWA-3100 User’s Guide
170
Figure 108 802 Attribute Setting for Tunnel-Medium-Type
13 Return to the RADIUS Attribute Screen shown as Figure 107 on page 169.
• Select Tunnel-Pvt-Group-ID.
• Click Add.
14 The Attribute Information screen displays.
•In the Enter the attribute value in: field select String and type a number in the range 1
to 4094 or a Name for this policy. This Name should match a name in the VLAN
mapping table on the ZyXEL Device. Wireless stations belonging to the VLAN Group
specified in this policy will be given a VLAN ID specified in the ZyXEL Device VLAN
table.
• Click OK.
Figure 109 VLAN ID Attribute Setting for Tunnel-Pvt-Group-ID
15 Return to the RADIUS Attribute Screen shown as Figure 107 on page 169.
• Select Tunnel-Type.
• Click Add.
16 The Enumerable Attribute Information screen displays.
• Select Virtual LANs (VLAN) from the attribute value drop-down list box.
• Click OK.