Chapter 11 Remote Management
ZyXEL NWA-3100 User’s Guide
128
11.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL
Device supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next figure
illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.
" SNMP is only available if TCP/IP is configured.
Figure 78 SNMP Management Model
An SNMP managed network consists of two main types of component: agents and a manager.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 41 Remote Management: WWW
LABEL DESCRIPTION
To Next Page
Loading...
