Chapter 11 Remote Management
ZyXEL NWA-3100 User’s Guide
127
Figure 77 Remote Management: WWW
The following table describes the labels in this screen.
Table 41 Remote Management: WWW
LABEL DESCRIPTION
HTTPS
Server Certificate Select the Server Certificate that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Authenticate
Client Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device (see the appendix on
importing certificates for details).
Server Port The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the ZyXEL Device, for example 8443,
then you must notify people who need to access the ZyXEL Device web
configurator to use "https://ZyXEL Device IP Address:8443" as the URL.
Server Access Select a ZyXEL Device interface from Server Access on which incoming HTTPS
access is allowed.
You can allow only secure web configurator access by setting the HTTP Server
Access field to Disable and setting the HTTPS Server Access field to an
interface(s).
Secured Client IP
Address
A secure client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
WWW
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
To Next Page
Loading...
