ZyXEL Communications NWA-3100 - Figure 41 Bridge Loop: Bridge Connected to Wired LAN; Figure 42 Wireless: Bridge;Repeater

Chapter 5 Wireless Configuration
ZyXEL NWA-3100 User’s Guide
78
Figure 41 Bridge Loop: Bridge Connected to Wired LAN
To prevent bridge loops, ensure that you enable STP in the Wireless screen or your ZyXEL
Device is not set to bridge mode while connected to both wired and wireless segments of the
same LAN.
To have the ZyXEL Device act as a wireless bridge only, click WIRELESS > Wireless and
select Bridge/Repeater as the Operating Mode.
Figure 42 Wireless: Bridge/Repeater