EasyManua.ls Logo

ZyXEL Communications NWA-3100 - AP + Bridge; Figure 1 Access Point Application

ZyXEL Communications NWA-3100
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introducing the ZyXEL Device
ZyXEL NWA-3100 User’s Guide
32
Figure 1 Access Point Application
1.2.2 AP + Bridge
In AP+Bridge mode, the ZyXEL Device supports both AP and bridge connection at the same
time.
In the figure below, A and B use X as an AP to access the wired network, while X and Y
communicate in bridge mode.
When the ZyXEL Device is in AP + Bridge mode, security between APs (the Wireless
Distribution System or WDS) is independent of the security between the wireless stations and
the AP. See Section 5.6.2 on page 76 for more details.
Unless specified, the term “security settings” refers to the traffic between the wireless stations
and the ZyXEL Device.
" If you do not enable WDS security in AP + Bridge mode, traffic between APs is
not encrypted.

Table of Contents

Related product manuals