Chapter 15 Maintenance
ZyXEL NWA-3100 User’s Guide
179
Click MAINTENANCE > F/W Upload. Follow the instructions in this screen to upload
firmware to your ZyXEL Device.
Figure 118 Firmware Upload
The following table describes the labels in this screen.
1 Do not turn off the ZyXEL Device while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyXEL Device again.
Figure 119 Firmware Upload In Process
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Table 65 Firmware Upload
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ...
to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two
minutes.
To Next Page
Loading...
