ZyXEL Communications NWA-3100 - Diagnostic; Figure 141 Menu 24.3 System Maintenance: Log and Trace; Figure 142 Sample Error and Information Messages; Figure 143 Menu 24.4 System Maintenance: Diagnostic

Chapter 21 System Information and Diagnosis
ZyXEL NWA-3100 User’s Guide
203
Figure 141 Menu 24.3 System Maintenance: Log and Trace
3 Enter 1 from Menu 24.3 – System Maintenance – Log and Trace and press [ENTER]
twice to display the error log in the system.
After the ZyXEL Device finishes displaying the error log, you will have the option to clear it.
Samples of typical error and information messages are presented in the next figure.
Figure 142 Sample Error and Information Messages
21.4 Diagnostic
The diagnostic facility allows you to test the different aspects of your ZyXEL Device to
determine if it is working properly. Menu 24.4 allows you to choose among various types of
diagnostic tests to evaluate your system, as shown in the following figure.
Figure 143 Menu 24.4 System Maintenance: Diagnostic
Follow the procedure next to get to display this menu:
1 From the main menu, type 24 to open Menu 24 – System Maintenance.
Menu 24.3 - System Maintenance - Log and Trace
1. View Error Log
Please enter selection:
56 Sat Jan 1 00:00:00 2000 PP05 ERROR Wireless LAN init fail, code=-1
57 Sat Jan 1 00:00:01 2000 PINI INFO Last errorlog repeat 1 Times
58 Sat Jan 1 00:00:01 2000 PINI INFO main: init completed
59 Sat Jan 1 00:00:02 2000 PP05 -WARN SNMP TRAP 3: link up
60 Sat Jan 1 00:00:30 2000 PSSV -WARN SNMP TRAP 0: cold start
61 Sat Jan 1 00:01:38 2000 PINI INFO SMT Session Begin
62 Sat Jan 1 00:06:44 2000 PINI INFO SMT Session End
63 Sat Jan 1 00:11:13 2000 PINI INFO SMT Session Begin
Clear Error Log (y/n):
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. DHCP Release
3. DHCP Renewal
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A