ZyXEL Communications NWA-3100 - Configuring WWW; Figure 76 Remote Management: FTP; Table 40 Remote Management: FTP

Chapter 11 Remote Management
ZyXEL NWA-3100 User’s Guide
126
Figure 76 Remote Management: FTP
The following table describes the labels in this screen.
11.5 Configuring WWW
To change your ZyXEL Device’s World Wide Web settings, click REMOTE MGNT >
WWW. You can set the ZyXEL Device to use HTTP or HTTPS (HTTPS adds security) for
web configurator sessions. Specify which interfaces allow web configurator access and from
which IP address the access can come.
Table 40 Remote Management: FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.