Chapter 14 Certificates
NWA1000 Series User’s Guide
123
14.2.1 Add My Certificates
Click Configuration > Object > Certificate > My Certificates and then the Add icon to open the Add My
Certificates screen. Use this screen to have the NWA1000 Series create a self-signed certificate, enroll a
certificate with a certification authority or generate a certification request.
Figure 77 Configuration > Object > Certificate > My Certificates > Add
Issuer This field displays identifying information about the certificate’s issuing certification authority,
such as a common name, organizational unit or department, organization or company and
country. With self-signed certificates, this is the same information as in the Subject field.
Valid From This field displays the date that the certificate becomes applicable.
Valid To This field displays the date that the certificate expires. The text displays in red and includes an
Expired! message if the certificate has expired.
Import Click Import to open a screen where you can save a certificate to the NWA1000 Series.
Refresh Click Refresh to display the current validity status of the certificates.
Table 55 Configuration > Object > Certificate > My Certificates (continued)
LABEL DESCRIPTION
To Next Page
Loading...
