Chapter 8 Monitor
NWA1000 Series User’s Guide
63
8.4.1 AP Mode Radio Information
This screen allows you to view a selected radio’s SSID details, wireless traffic statistics and station count
for the preceding 24 hours. To access this window, select a radio and click the More Information button
in the Radio List screen.
Loading This indicates the AP’s load balance status (UnderLoad or OverLoad) when load balancing is
enabled on the NWA1000 Series. Otherwise, it shows - when load balancing is disabled or the
radio is in monitor mode.
MAC Address This displays the MAC address of the radio.
Radio This indicates the radio number on the NWA1000 Series to which it belongs.
OP Mode This indicates the radio’s operating mode. Operating modes are AP (MBSSID), Root AP or
Repeater.
AP/WDS Profile This indicates the AP profile name and WDS profile name to which the radio belongs.
This field is available only on the NWA1000 Series that supports WDS.
Profile This indicates the AP profile name to which the radio belongs.
This field is available only on the NWA1000 Series that doesn’t support WDS.
Frequency Band This indicates the wireless frequency band currently being used by the radio.
This shows - when the radio is in monitor mode.
Channel This indicates the radio’s channel ID.
Tx Power This displays the output power of the radio.
Station This displays the number of wireless clients connected to this radio on the NWA1000 Series.
Rx This displays the total number of packets received by the radio.
Tx This displays the total number of packets transmitted by the radio.
Table 24 Monitor > Wireless > AP Information > Radio List (continued)
LABEL DESCRIPTION
To Next Page
Loading...
