NWA1000 Series User’s Guide
193
CHAPTER 24
The Web Configurator
24.1 Overview
The NWA1000 Series Web Configurator allows easy management using an Internet browser.
See Section 5.1 on page 34 for requirements in using the Web Configurator
24.2 Access
1 Make sure your NWA1000 Series hardware is properly connected. See the Quick Start Guide.
2 Make sure your computer’s IP address is in the same subnet as the NWA1000 Series’s IP address.
3 Browse to http://(NWA1000 Series’s IP address). See Section 23.1 on page 191 for more information.
4 The Login screen appears.
5 Enter the user name (default: “admin”) and password (default: “1234”). If the NWA1000 Series is being
managed or has been managed by the NCC, check the NCC's Site-Wide > Configure > General setting
screen for the NWA1000 Series's current password.
Click the Visit button when you want to open the Zyxel Nebula Control Center (NCC) login page in a
new tab or window.
6 Click Login.
To Next Page
Loading...
