Chapter 15 System
NWA1000 Series User’s Guide
155
• Trap - Used by the agent to inform the manager of some events.
15.8.1 Supported MIBs
The NWA1000 Series supports MIB II that is defined in RFC-1213 and RFC-1215. The NWA1000 Series also
supports private MIBs (ZYXEL-ES-CAPWAP.MIB, ZYXEL-ES-COMMON.MIB, ZYXEL-ES-ZyXELAPMgmt.MIB,
ZYXEL-ES-PROWLAN.MIB, ZYXEL-ES-RFMGMT.MIB, ZYXEL-ES-SMI.MIB, and ZYXEL-ES-WIRELESS.MIB) to collect
information about CPU and memory usage and VPN total throughput. The focus of the MIBs is to let
administrators collect statistical data and monitor status and performance. You can download the
NWA1000 Series’s MIBs from www.zyxel.com.
15.8.2 SNMP Traps
The NWA1000 Series will send traps to the SNMP manager when any one of the following events occurs.
15.8.3 Configuring SNMP
To change your NWA1000 Series’s SNMP settings, click Configuration > System > SNMP tab. The screen
appears as shown. Use this screen to configure your SNMP settings. You can also configure user profiles
that define allowed SNMPv3 access.
Figure 101 Configuration > System > SNMP
Table 69 SNMP Traps
OBJECT LABEL OBJECT ID DESCRIPTION
linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is down.
linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
authenticationFailure 1.3.6.1.6.3.1.1.5.5 This trap is sent when an SNMP request comes from non-
authenticated hosts.
To Next Page
Loading...
