ZyXEL Communications NWA1000 Series - Chapter 4 Standalone Mode; Overview; Standalone Mode; Ways to Manage the NWA1000 Series

NWA1000 Series User’s Guide
31
CHAPTER 4
Standalone Mode
4.1 Overview
The NWA1000 Series operates in standalone mode by default. Use the web configurator to manage and
configure it directly. As shown in the following figure, wireless clients can connect to the NWA1000 Series
(A) to access network resources.
4.2 Ways to Manage the NWA1000 Series
You can use the following ways to manage the NWA1000 Series.
Web Configurator
The Web Configurator allows easy NWA1000 Series setup and management using an Internet browser.
This User’s Guide provides information about the Web Configurator.
Command-Line Interface (CLI)
The CLI allows you to use text-based commands to configure the NWA1000 Series. You can access it
using remote management (for example, SSH or Telnet). See the Command Reference Guide for more
information.