ZyXEL Communications NWA1000 Series - Examples of Secure Telnet Using SSH

Chapter 15 System
NWA1000 Series User’s Guide
151
15.5.5 Examples of Secure Telnet Using SSH
This section shows two examples using a command interface and a graphical interface SSH client
program to remotely access the NWA1000 Series. The configuration and connection steps are similar for
most SSH client programs. Refer to your SSH client program user’s guide.
15.5.5.1 Example 1: Microsoft Windows
This section describes how to access the NWA1000 Series using the Secure Shell Client program.
1 Launch the SSH client and specify the connection information (IP address, port number) for the
NWA1000 Series.
2 Configure the SSH client to accept connection using SSH version 2.
3 A window displays prompting you to store the host key in you computer. Click Yes to continue.
Figure 95 SSH Example 1: Store Host Key
Enter the password to log in to the NWA1000 Series. The CLI screen displays next.
15.5.5.2 Example 2: Linux
This section describes how to access the NWA1000 Series using the OpenSSH client program that comes
with most Linux distributions.
Server Certificate Select the certificate whose corresponding private key is to be used to identify the NWA1000
Series for SSH connections. You must have certificates already configured in the My Certificates
screen.
Apply Click Apply to save your changes back to the NWA1000 Series.
Reset Click Reset to return the screen to its last-saved settings.
Table 66 Configuration > System > SSH (continued)
LABEL DESCRIPTION