ZyXEL Communications NWA1000 Series - Chapter 10 Wireless; Overview; What You Can Do in this Chapter; Wireless

NWA1000 Series User’s Guide
78
CHAPTER 10
Wireless
10.1 Overview
This chapter discusses how to configure the wireless network settings in your NWA1000 Series.
The following figure provides an example of a wireless network.
Figure 47 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your NWA1000 Series is the AP.
10.1.1 What You Can Do in this Chapter
• The AP Management screen (Section 10.2 on page 79) manages the NWA1000 Series’s general
wireless settings.
• The Rogue AP screen (Section 10.3 on page 82) allows you to assign APs either to the rogue AP list or
the friendly AP list.
• The Load Balancing screen (Section 10.4 on page 85) configures network traffic load balancing
between the APs and the NWA1000 Series.
• The DCS screen (Section 10.5 on page 87) configures dynamic radio channel selection.