Chapter 14 Certificates
NWA1000 Series User’s Guide
129
Figure 79 Configuration > Object > Certificate > My Certificates > Import
The following table describes the labels in this screen.
14.3 Trusted Certificates
Click Configuration > Object > Certificate > Trusted Certificates to open the Trusted Certificates screen.
This screen displays a summary list of certificates that you have set the NWA1000 Series to accept as
trusted. The NWA1000 Series also accepts any valid certificate signed by a certificate on this list as being
trustworthy; thus you do not need to import any certificate that is signed by one of these certificates.
Table 58 Configuration > Object > Certificate > My Certificates > Import
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse to find it.
You cannot import a certificate with the same name as a certificate that is already in the NWA1000
Series.
Browse Click Browse to find the certificate file you want to upload.
Password This field only applies when you import a binary PKCS#12 format file. Type the file’s password that was
created when the PKCS #12 file was exported.
OK Click OK to save the certificate on the NWA1000 Series.
Cancel Click Cancel to quit and return to the My Certificates screen.
To Next Page
Loading...
