Chapter 15 System
NWA1000 Series User’s Guide
148
15.4.5.6 Using a Certificate When Accessing the NWA1000 Series
To access the NWA1000 Series via HTTPS:
1 Enter ‘https://NWA1000 Series IP Address/’ in your browser’s web address field.
2 When Authenticate Client Certificates is selected on the NWA1000 Series, the following screen asks you
to select a personal certificate to send to the NWA1000 Series. This screen displays even if you only have
a single certificate as in the example.
3 You next see the Web Configurator login screen.
15.5 SSH
You can use SSH (Secure SHell) to securely access the NWA1000 Series’s command line interface.
SSH is a secure communication protocol that combines authentication and data encryption to provide
secure encrypted communication between two hosts over an unsecured network. In the following
figure, computer B on the Internet uses SSH to securely connect to the NWA1000 Series (A) for a
management session.
To Next Page
Loading...
