ZyXEL Communications NWA1000 Series - Accessing the Web Configurator; Overview; The Web Configurator

NWA1000 Series User’s Guide
34
CHAPTER 5
The Web Configurator
5.1 Overview
The NWA1000 Series Web Configurator allows easy management using an Internet browser.
In order to use the Web Configurator, you must:
• Use Internet Explorer 10.0 and later versions, Mozilla Firefox 36.0 and later versions, Safari 9.0 and later
versions, or Google Chrome 38.0 and later versions.
• Allow pop-up windows.
• Enable JavaScript (enabled by default).
• Enable Java permissions (enabled by default).
• Enable cookies.
The recommended screen resolution is 1024 x 768 pixels and higher.
5.2 Accessing the Web Configurator
1 Make sure your NWA1000 Series is working in standalone mode (see Section 1.2.1 on page 13) and
hardware is properly connected. See the Quick Start Guide.
2 If the NWA1000 Series and your computer are not connected to a DHCP server, make sure your
computer’s IP address is in the range between "192.168.1.3" and "192.168.1.254".
3 Browse to the NWA1000 Series’s DHCP-assigned IP address or http://192.168.1.2. The Login screen
appears.