ZyXEL Communications NWA1000 Series - Nwa1123-Ac Hd; NWA1123-Acv2

Chapter 3 Hardware
NWA1000 Series User’s Guide
26
3.2.2 NWA1123-ACv2
The following are the LED descriptions for your NWA1123-ACv2.
Figure 10 NWA1123-ACv2 LED
The following are the LED descriptions for your NWA1123-ACv2.
3.2.3 NWA1123-AC HD
The following are the LED descriptions for your NWA1123-AC HD.
Table 7 NWA1123-ACv2 LED
COLOR STATUS DESCRIPTION
Amber Blinks amber for 1
second and green for
1 second alternatively.
The LED blinks orange and green alternatively when the NWA1000
Series is booting up.
Green
Amber Blinks amber and
green alternatively 3
times and then turns
solid green for 3
seconds.
The NWA1000 Series is discovering the NCC.
Green
Green On The NWA1000 Series is ready for use and its wireless interface is
activated.
Slow Blinking (On for 1
sec, Off for 1 sec)
The wireless module of the NWA1000 Series is disabled or failed, or
the NWA1000 Series is connected to the NCC, but not registered.
Red On The NWA1000 Series failed to boot up or is experience system failure.
Fast Blinking (On for 50
ms, Off for 50 ms)
The NWA1000 Series is undergoing firmware upgrade.