Chapter 11 User
NWA1000 Series User’s Guide
94
11.3 Setting
This screen controls default settings, login settings, lockout settings, and other user settings for the
NWA1000 Series.
To access this screen, login to the Web Configurator, and click Configuration > Object > User > Setting.
Authentication
Timeout Settings
This field is not available if the user type is user.
If you want to set authentication timeout to a value other than the default settings, select
Use Manual Settings then fill your preferred values in the fields that follow.
Lease Time This field is not available if the user type is user.
Enter the number of minutes this user has to renew the current session before the user is
logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the number of
minutes unlimited. Admin users renew the session every time the main screen refreshes in the
Web Configurator.
Reauthentication
Time
This field is not available if the user type is user.
Type the number of minutes this user can be logged into the NWA1000 Series in one session
before the user has to log in again. You can specify 1 to 1440 minutes. You can enter 0 to
make the number of minutes unlimited. Unlike Lease Time, the user has no opportunity to
renew the session without logging out.
OK Click OK to save your changes back to the NWA1000 Series.
Cancel Click Cancel to exit this screen without saving your changes.
Table 40 Configuration > User > User > Add/Edit A User (continued)
LABEL DESCRIPTION
To Next Page
Loading...
