Chapter 5 The Web Configurator
NWA1000 Series User’s Guide
40
CLI Messages
Click CLI to look at the CLI commands sent by the Web Configurator. These commands appear in a
popup window, such as the following.
Figure 18 CLI Messages
Click Clear to remove the currently displayed information.
Note: See the Command Reference Guide for information about the commands.
5.3.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure NWA1000 Series features.
Click the arrow in the middle of the right edge of the navigation panel to hide the navigation panel
menus or drag it to resize them. The following sections introduce the NWA1000 Series’s navigation panel
menus and their screens.
Priority If it is applicable, this field lists the referencing configuration item’s position in its list, otherwise
N/A displays.
Name This field identifies the configuration item that references the object.
Description If the referencing configuration item has a description configured, it displays here.
Refresh Click this to update the information in this screen.
Cancel Click Cancel to close the screen.
Table 13 Object References (continued)
LABEL DESCRIPTION
To Next Page
Loading...
