ZyXEL Communications NWA1000 Series - Chapter 22 Shutdown; Overview; Shutdown; What You Need to Know

NWA1000 Series User’s Guide
189
CHAPTER 22
Shutdown
22.1 Overview
Use this screen to shut down the device.
Always use Maintenance > Shutdown > Shutdown or the shutdown
command before you turn off the NWA1000 Series or remove the power.
Not doing so can cause the firmware to become corrupt.
22.1.1 What You Need To Know
Shutdown writes all cached data to the local storage and stops the system processes. Shutdown is
different to reset; reset returns the device to its default configuration.
22.2 Shutdown
To access this screen, click Maintenance > Shutdown.
Figure 119 Maintenance > Shutdown
Click the Shutdown button to shut down the NWA1000 Series. Wait for the device to shut down before
you manually turn off or remove the power. It does not turn off the power.
You can also use the CLI command shutdown to shut down the NWA1000 Series.