ZyXEL Communications NWA1000 Series - Chapter 3 Hardware; Hardware; Nwa1123-Ac Pro; Standalone Mode Leds

Chapter 3 Hardware
NWA1000 Series User’s Guide
19
CHAPTER 3
Hardware
See your Quick Start Guide for information on making hardware connections.
3.1 Standalone Mode LEDs
The LEDs of your NWA1000 Series can be controlled by using the Suppression feature such that the LEDs
stay lit (ON) or OFF after the device is ready.
Following are LED descriptions for the NWA1000 Series series models in standalone mode.
3.1.1 NWA1123-AC PRO
The LEDs will stay ON when the NWA1123-AC PRO is ready. You can change this setting in the
Maintenance > LEDs > Suppression screen.
Figure 5 NWA1123-AC PRO LEDs