NWA1000 Series User’s Guide
135
CHAPTER 15
System
15.1 Overview
Use the system screens to configure general NWA1000 Series settings.
15.1.1 What You Can Do in this Chapter
•The Host Name screen (Section 15.2 on page 135) configures a unique name for the NWA1000 Series
in your network.
• The Date/Time screen (Section 15.3 on page 136) configures the date and time for the NWA1000
Series.
• The WWW screens (Section 15.4 on page 140) configure settings for HTTP or HTTPS access to the
NWA1000 Series.
• The SSH screen (Section 15.5 on page 148) configures SSH (Secure SHell) for securely accessing the
NWA1000 Series’s command line interface.
• The Telnet screen (Section 15.6 on page 152) configures Telnet for accessing the NWA1000 Series’s
command line interface.
•The FTP screen (Section 15.7 on page 153) specifies FTP server settings. You can upload and
download the NWA1000 Series’s firmware and configuration files using FTP. Please also see Chapter 17
on page 170 for more information about firmware and configuration files.
• The SNMP screens (Section 15.8 on page 154) configure the device’s SNMP settings, including profiles
that define allowed SNMPv3 access.
15.2 Host Name
A host name is the unique name by which a device is known on a network. Click Configuration > System
> Host Name to open this screen.
Figure 83 Configuration > System > Host Name
To Next Page
Loading...
