ZyXEL Communications NWA1000 Series - Page 83

Chapter 10 Wireless
NWA1000 Series User’s Guide
83
Figure 49 Configuration > Wireless > Rogue AP
Each field is described in the following table.
Table 34 Configuration > Wireless > Rogue AP
LABEL DESCRIPTION
Rogue AP Detection
Setting
Enable Rogue AP
Detection
Select this option to detect Rogue APs in the network.
Suspected Rogue AP
Classification Rule
Click the check boxes (Weak Security (Open, WEP, WPA-PSK), Hidden SSID, SSID
Keyword) of the characteristics an AP should have for the NWA1000 Series to rule it as
a Rogue AP.
Add Click this to add an SSID Keyword.
Edit Select an SSID Keyword and click this button to modify it.
Remove Select an existing SSID keyword and click this button to delete it.
# This is the SSID Keyword’s index number in this list.
SSID Keyword This field displays the SSID Keyword.
Rogue/Friendly AP List
Add Click this button to add an AP to the list and assign it either friendly or rogue status.
Edit Select an AP in the list to edit and reassign its status.
Remove Select an AP in the list to remove.