ZyXEL Communications P-870HN-5xb - Page 88

Chapter 5 WAN Setup
P-870HN-5xb User’s Guide
88
Vendor Class
Identifier
Enter the Vendor Class Identifier (Option 60), such as the type of the
hardware or firmware.
Enable DHCP
Option 61
Select this to identify the Device in DHCP requests that the Device
sends to a DHCP server when getting a WAN IP address.
IAID Enter the Identity Association Identifier (IAID) of the Device. For
example, the WAN connection index number.
DUID Type Select Other to enter any string that identifies the Device in the
DUID field.
Select DUID-LL (DUID Based on Link-layer Address) to enter the
Device’s hardware address, that is the MAC address in the DUID field.
Select DUID-EN (DUID Assigned by Vendor Based on Enterprise
Number) to enter the vendor’s registered private enterprise number.
Identifier Enter a unique identifier assigned by the vendor.
This field is available when you select DUID-EN in the DUID Type
field.
Enable DHCP
Option 125
Select this to add vendor specific information to DHCP requests that
the Device sends to a DHCP server when getting a WAN IP address.
Manufacturer
OUI
Specify the vendor’s OUI (Organization Unique Identifier). It is usually
the first three bytes of the MAC address.
Product Class Enter the product class of the Device.
Model Name Enter the model name of the Device.
Serial Number Enter the serial number of the Device.
Use the following
Static IP address
Select this if you have a static IP address.
WAN IP
Address
Enter the static IP address provided by your ISP.
WAN Subnet
Mask
Enter the subnet mask provided by your ISP.
WAN gateway
IP Address
Enter the gateway IP address provided by your ISP.
Obtain an IPv6
address
automatically
Select this option if you want to have the Device use the IPv6 prefix
from the connected router’s Router Advertisement (RA) to generate
an IPv6 address.
Obtain an
IPv6 address
from DHCPv6
server
Select this checkbox if you want to obtain an IPv6 address from a
DHCPv6 server.
The IP address assigned by a DHCPv6 server has priority over the IP
address automatically generated by the Device using the IPv6 prefix
from an RA.
Use the following
Static IPv6
address
Select this option if you have a fixed IPv6 address assigned by your
ISP.
WAN IPv6
Address
Enter the static IPv6 address provided by your ISP.
Table 17 WAN Configuration: IPoE
LABEL DESCRIPTION